SPEEDY Connection Sharing

Speedy is one of the many internet connections are pretty much demand for this now. This happens because of the stability and speed connection to the internet is fairly adequate for home Internet users, although there are also some cases of customers who have problems with stability and Speedy connection is slow. With the connection speed up to 384 kbps, then Speedy connection with this we can use for multiple computers at once, which is usually referred to as "connection sharing".

Provide two LAN cards, one for the connection of the Speedy and the other to the local network. Install two LAN cards on the computer will be the server, then assign a name to each LAN card, so that later you do not get confused when you tamper with its IP. For example, you can provide a name for the connection SPEEDY speedynya, and LOCAL to the network out to the client.

• Open the [Properties] SPEEDY his connections.
• Select the [Advanced].
• In the [Internet Connection Sharing], give tick tick on [Allow other network users to connect through this computer's Internet connection].
• Write down the IP Address, Subnet Mask, Default Gateway, Prefered DNS Server and Alternate DNS Server provided by Telkom on SPEEDY connection that you can see through the [Command Prompt] by typing [ipconfig]. If for a list of DNS can you can see the end of this article.
• It is not the LOCAL connection properties, then enter the IP Address, Subnet Mask, Default Gateway, Prefered DNS Server and Alternate DNS Server provided by Telkom previously SPEEDY connection you noted earlier. For example:

LAN 1 to SPEEDY Connection:

• IP Address: 192.168.1.250
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.1.1
• Prefered DNS Server: 203 130 206 250
• Alternate DNS Server: 202.134.0.155

2 for LOCAL LAN connection:

• IP Address: 192.168.0.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.0.1
• Prefered DNS Server: 203 130 206 250
• Alternate DNS Server: 202.134.0.155

Furthermore, the client must provide CPU existing LAN card. Then start to make a connection with the re-opening setting properties on an existing LAN connection. Fill in the IP Address, Subnet Mask, Default Gateway, Prefered DNS Server and Alternate DNS according to LOCAL connections that have been created on the server CPU, for example:

• IP Address: 192.168.0.2
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.0.1
• Prefered DNS Server: 203 130 206 250
• Alternate DNS Server: 202.134.0.155

Note: Here is a list provided by the Speedy DNS:

• Field: 203 130 206 250
• Batam: 203.130.193.74
• Jakarta: 202.134.0.155
• Jakarta: 203 130 196 155
• New York: 222.124.204.34
• Surabaya: 202.134.1.10
• Balikpapan: 203 130 209 242
• Denpasar: 61.94.192.12